By admin • May 3, 2015 • Comments Off on Belkin Tech Support For Error-Free Network
Belkin router is famous for its high-speed wireless internet connectivity. As, it is a machine, it requires constant care; otherwise it will cause problems to the users. In case any issues, you can try these basic troubleshooting steps, revealed by the expert Belkin Tech Support. Check it out.
Make sure that you are getting the internet from the ISP. Check before you start any troubleshooting steps.
Make sure that you are typing the correct password for your network name. If you have forgotten then call Belkin tech support for immediate solution.
If you are unable to access wireless internet on a single device, then follow these steps:
Remove any other wireless network name, which you use, from your device and try to connect again with your wireless network.
Check whether the Wi-Fi is turned on in your device. If you are using a laptop, the button will be on your keyboard. If you are using any smartphones or tablets, then go to Settings and turn on the Wi-Fi button.
Check if you are using the correct password. Type it again in the same manner and space between the letters. Note that your password is case sensitive.
If you are facing this problem in multiple devices, then follow these instructions:
Check if you are getting a stable connection from your ISP.
Update the firmware of your router by this method.
Follow these basic troubleshooting steps for better solution:
Connect your computer directly with the router through an Ethernet cable
Open the router setup wizard page. Enter the router’s IP address. Hit Enter. Check your IP address from ipconfig command in the run command. Look for the default gateway.
Type the username and password and click on Submit. The default password for Belkin router is blank.
Go to SSID and the Wireless option and change the Wireless Channel to six. Click on Apply Changes.
Reconnect to the wireless network and check if your Wi-Fi is working.
Comments are closed.